This manuscript details a study focusing on determining the appropriate size for photovoltaic (PV) modules. The research involves creating a mathematical model that considers how temperature impacts the energy output of PV modules. This model, derived from empirical data, correlates sunlight and the highest ambient temperature to establish what's termed as "temperature-induced efficiency" in PV module performance. This correlation can be incorporated into the standard PV array sizing formula. The set of mathematical expressions provided facilitates calculating the dimensions of PV modules by factoring in sunlight, temperature, and other relevant variables. The slight discrepancy of 0.85 percent between data obtained through our equation and experimental data suggests a low level of error. These findings indicate that the formulated equation effectively predicts temperature-induced efficiency in PV modules. Furthermore, applying this equation along with NASA's sunshine and ambient temperature data allows for calculating the efficiency induced by temperature for specific cities. For instance, in Ouagadougou, Peking, Paris, Brasilia, and Washington, the temperature-induced efficiencies are calculated as 0.9, 0.95, 0.96, 0.93, and 0.98, respectively.
| Published in | American Journal of Energy Engineering (Volume 11, Issue 4) |
| DOI | 10.11648/j.ajee.20231104.14 |
| Page(s) | 127-133 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Effect of Temperature, Photovoltaic Energy, Sizing of PV Modules
| [1] | Siva Ramakrishna Madeti, S. N. Singh, A comprehensive study on different types of faults and detection techniques for solar photovoltaic system, Solar Energy, Volume 158, 2017, Pages 161-185, ISSN 0038-092X, https://doi.org/10.1016/j.solener.2017.08.069. |
| [2] | Vaclav B, Tomae Ol, Martin Libra, Vladislav P, Jan S, Minh-Quan D, Igor T, New Monitoring System for Photovoltaic Power Plants’ Management Energies, 10.3390/en11102495, 11, 10, (2495), (2018). |
| [3] | Hegazy Rezk, Igor Tyukhov, Mujahed Al-Dhaifallah, Anton Tikhonov, Performance of data acquisition system for monitoring PV system parameters, Measurement, 10.1016/j.measurement.2017.02.050, 104, 204-211, (2017). |
| [4] | Rezk, Hegazy; Tyukhov, Igor; Raupov, A. (2015). Experimental implementation of meteorological data and photovoltaic solar radiation monitoring system. International Transactions on Electrical Energy Systems doi: 10.1002/etep.2053. |
| [5] | Mambrini, T. Caracterisation de panneaux solaires photovoltaïques en conditions réelles d’implantation et en function des différentes technologies. Thesis, Université Paris-sud, France, 2014. |
| [6] | Dominique Bonkoungou, Toussaint Guingane, Eric Korsaga, Sosthène Tassembedo, Zacharie Koalaga, Arouna Darga, François Zougmore, "A Novel Topology to Improve PV Module Efficiency under Partial Shading Conditions", International Journal of Photoenergy, vol. 2022, Article ID 4401187, 19 pages, 2022. |
| [7] | BISHOP, J. W. Computer simulation of the effects of electrical mismatches in photovoltaic cell interconnection circuits. Solar Cells, Italie, 1988. |
| [8] | BONKOUNGOU, D. Étude de l’impact de la variabilité de l’irradiation solaire et des paramètres météorologiques sur la production d’énergie d’une centrale solaire PV alimentant en réseau isolé un village du Burkina Faso. Thesis, UNIVERSITE OUAGA 1 Pr Joseph KI-ZERBO, Burkina Faso, 2016. |
| [9] | Salim, J. A., Albaker, B. M., Alwan, M. S., Hasanuzzaman, M. Hybrid MPPT approach using Cuckoo Search and Grey Wolf Optimizer for PV systems under variant operating conditions. Global Energy Interconnection, 2022. |
| [10] | Naeijian, M., Pourmousa, N., Rahimnejad, A., Ebrahimi, S. M., Gadsden, S. A. Parameter estimation of PV solar cells and modules using Whippy Harris Hawks Optimization Algorithm. Energy Reports, 2021. |
| [11] | Saadaoui, D., Elyaqouti, M., Assalaou, K., Ben hmamou, D., Lidaighbi, S. Parameters optimization of solar PV cell / module using genetic algorithm based on non-uniform mutation. Energy Conversion and Management, 2021. |
| [12] | Yaw-Juen Wang, “Po-Chun Hsu an investigation on partial shading of PV modules with different connection configurations of PV cells” Energy 36 (2011) 3069e3078, doi: 10.1016/j.energy.2011.02.052. |
| [13] | Boghdady, T. A., Mohamed, Y. A. Reactive power compensation using STATCOM in a PV grid connected system with a modified MPPT method. Ain Shams Engineering Journal, 2022. |
| [14] | Piccoli, E., Dama, A., Dolara, A., Leva, S. Experimental validation of a model for PV systems under partial shading for building integrated applications. Solar Energy, Italie, 2019. |
| [15] | Dio, V. D., Cascia, D. L., Miceli R., Rando, C. A Mathematical Model to Determine the Electrical Energy Production in Photovoltaic Fields Under Mismatch Effect. IEEE, Italie, 2009. |
| [16] | Aoun, N. Methodology for predicting the PV module temperature based on actual and estimated weather data. Energy Conversion and Management, 2022. |
| [17] | Bi, B. E. B., Gbaha, P., Koffi M. P. E., Koua, K. B. Modélisation Des Composants D’un Système Hybride Panneaux Photovoltaïque – Stockage D’énergie Via L’hydrogène – Batteries. European Scientific Journal, Côte d’Ivoire, 2018. |
| [18] | Guiheneuf, V. Approche multi-physique du vieillissement des matériaux pour application photovoltaïque. Thesis, Université Paris-Est, France, 2017. |
| [19] | Tifidat, K., Maouhoub, N., Benahmida, A., Salah, F. E. A. An accurate approach for modeling I-V characteristics of photovoltaic generators based on the two-diode model. Energy Conversion and Management, 2022. |
| [20] | Sundaram, K. M., Boopathi, C. S., Pandian, A., Kalyan Sagar Kadali, Sathyamurthy, R., Anandhraj, P., Madhu, B. Predator-Prey based firefly optimization for PV Module parameters extraction. Energy Reports 7, 2021. |
| [21] | Motahhir, S., El Hammoumi, A., El Ghzizal, A. Photovoltaic system with quantitative comparative between an improved MPPT and existing INC and P&O methods under fast varying of solar irradiation. Energy Reports, 2018. |
| [22] | Libra, M., Poulek, V. Influence of Temperature on Important Characteristics of Photovoltaic Cells. Green Energy and Technology, 2021. |
| [23] | Shaheen, A. M., El-Seheimy, R. A., Xiong, G., Elattar, E., Ginidi, A. R. Parameter identification of solar photovoltaic cell and module models via supply demand optimizer. Ain Shams Engineering Journal, Egypte, 2022. |
| [24] | Dominique Bonkoungou, Jacques Marie Ilboudo, Abdoulaye Kabre, Zacharie Koalaga. Monitoring and Effectiveness Analysis of a Hybrid PV Battery System in Real Conditions. International Journal of Energy and Power Engineering (in press) 2023. |
| [25] | Bruni, G., Cordiner, S., Mulone, V. Domestic distributed power generation: Effect of sizing and energy management strategy on the environmental efficiency of a photovoltaic-battery-fuel cell system. Energy, 2014. |
| [26] | Soufi, A., Chermitti, A., Triki, N. B. Sizing and Optimization of a Livestock Shelters Solar Stand-Alone Power System. International Journal of Computer Applications, 2013. |
| [27] | Korsaga, E. Etude comparative des dispositifs de stockage de l’énergie applicables aux systèmes photovoltaïques au Burkina Faso. Thesis, UNIVERSITE OUAGA 1 Pr Joseph KI-ZERBO, Burkina Faso, 2019. |
APA Style
Ilboudo, J. M., Bonkoungou, D., Koalaga, Z. (2023). A New Approach to Sizing PV Modules While Accounting the Effect of Temperature. American Journal of Energy Engineering, 11(4), 127-133. https://doi.org/10.11648/j.ajee.20231104.14
ACS Style
Ilboudo, J. M.; Bonkoungou, D.; Koalaga, Z. A New Approach to Sizing PV Modules While Accounting the Effect of Temperature. Am. J. Energy Eng. 2023, 11(4), 127-133. doi: 10.11648/j.ajee.20231104.14
AMA Style
Ilboudo JM, Bonkoungou D, Koalaga Z. A New Approach to Sizing PV Modules While Accounting the Effect of Temperature. Am J Energy Eng. 2023;11(4):127-133. doi: 10.11648/j.ajee.20231104.14
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajee.20231104.14,
author = {Jacques Marie Ilboudo and Dominique Bonkoungou and Zacharie Koalaga},
title = {A New Approach to Sizing PV Modules While Accounting the Effect of Temperature},
journal = {American Journal of Energy Engineering},
volume = {11},
number = {4},
pages = {127-133},
doi = {10.11648/j.ajee.20231104.14},
url = {https://doi.org/10.11648/j.ajee.20231104.14},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajee.20231104.14},
abstract = {This manuscript details a study focusing on determining the appropriate size for photovoltaic (PV) modules. The research involves creating a mathematical model that considers how temperature impacts the energy output of PV modules. This model, derived from empirical data, correlates sunlight and the highest ambient temperature to establish what's termed as "temperature-induced efficiency" in PV module performance. This correlation can be incorporated into the standard PV array sizing formula. The set of mathematical expressions provided facilitates calculating the dimensions of PV modules by factoring in sunlight, temperature, and other relevant variables. The slight discrepancy of 0.85 percent between data obtained through our equation and experimental data suggests a low level of error. These findings indicate that the formulated equation effectively predicts temperature-induced efficiency in PV modules. Furthermore, applying this equation along with NASA's sunshine and ambient temperature data allows for calculating the efficiency induced by temperature for specific cities. For instance, in Ouagadougou, Peking, Paris, Brasilia, and Washington, the temperature-induced efficiencies are calculated as 0.9, 0.95, 0.96, 0.93, and 0.98, respectively.
},
year = {2023}
}
TY - JOUR T1 - A New Approach to Sizing PV Modules While Accounting the Effect of Temperature AU - Jacques Marie Ilboudo AU - Dominique Bonkoungou AU - Zacharie Koalaga Y1 - 2023/12/08 PY - 2023 N1 - https://doi.org/10.11648/j.ajee.20231104.14 DO - 10.11648/j.ajee.20231104.14 T2 - American Journal of Energy Engineering JF - American Journal of Energy Engineering JO - American Journal of Energy Engineering SP - 127 EP - 133 PB - Science Publishing Group SN - 2329-163X UR - https://doi.org/10.11648/j.ajee.20231104.14 AB - This manuscript details a study focusing on determining the appropriate size for photovoltaic (PV) modules. The research involves creating a mathematical model that considers how temperature impacts the energy output of PV modules. This model, derived from empirical data, correlates sunlight and the highest ambient temperature to establish what's termed as "temperature-induced efficiency" in PV module performance. This correlation can be incorporated into the standard PV array sizing formula. The set of mathematical expressions provided facilitates calculating the dimensions of PV modules by factoring in sunlight, temperature, and other relevant variables. The slight discrepancy of 0.85 percent between data obtained through our equation and experimental data suggests a low level of error. These findings indicate that the formulated equation effectively predicts temperature-induced efficiency in PV modules. Furthermore, applying this equation along with NASA's sunshine and ambient temperature data allows for calculating the efficiency induced by temperature for specific cities. For instance, in Ouagadougou, Peking, Paris, Brasilia, and Washington, the temperature-induced efficiencies are calculated as 0.9, 0.95, 0.96, 0.93, and 0.98, respectively. VL - 11 IS - 4 ER -
Institute of Research in Applied Sciences and Technologies, Ouagadougou, Burkina Faso
Departement of Applied Science, University of Thomas Sankara, Ouagadougou, Burkina Faso
Departement of Applied Science, University of Joseph Ki-Zerbo, Ouagadougou, Burkina Faso
Information