Development the Measurement System of the Multi-Channel Frequency Standard Comparison

Zhang Yue; Liu Yanqi; Lin Tao; Yuan Xiaodi; Zhang Ammin; Wang Yuzhuo

doi:doi:10.11648/j.jeee.20210904.13

| Peer-Reviewed

Development the Measurement System of the Multi-Channel Frequency Standard Comparison

Zhang Yue, Liu Yanqi, Lin Tao, Yuan Xiaodi, Zhang Ammin, Wang Yuzhuo

Published in Journal of Electrical and Electronic Engineering (Volume 9, Issue 4)

Received: 14 July 2021 Accepted: 29 July 2021 Published: 4 August 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper introduces a measurement system and method of high-speed sampling and full digital for the comparison of multi-channel frequency standard. The hardware of the system consists of 4 parts: A: Impedance matching module (After matching with the impedance of the acquisition circuit, the two input signals are transformed into suitable amplitude, and then transformed into digital signals by the high-speed acquisition circuit). B: High speed data acquisition module. C: Data real-time processing module. D: Calculation module for phase difference and frequency stability. The system not only can achieve real-time processing under the minimum computing resources, but also provide the upper computer with complete information and equivalent frequency data with small amount of data. Moreover, the fast and high-precision calculation of phase difference and frequency stability can be achieved by improving the calculation process. The software of the system meets the requirements for the technical specifications of national metrology. Compared with domestic and foreign frequency standard comparators, the interface of software is more friendly, the operation is more convenient, and it has a strong ability to analyze and process data. The test results show that the uncertainty of the system is better than 1.5 ×10^-13 (sampling time is 1 second), which is consistent with Russian VCH-315 index.

Published in	Journal of Electrical and Electronic Engineering (Volume 9, Issue 4)
DOI	10.11648/j.jeee.20210904.13
Page(s)	116-122
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Frequency Standard Metrology, Frequency Standard Comparison, Frequency Stability, Dual Mixer Time Difference Measurement (DMTD)

References

[1]	Zhang A M, Gao X X, Ning D Y, et al. Realization of 8-channel DMTD Measurement System [J]. Acta Metrologica Sinica, 2009, 30 (6): 563-566.
[2]	Zhao K J, Zhang A M, Xu Q H, et al. Experiment research on digital DMTD measurement [J]. Chinese Journal of Scientific Instrument, 2014, 35 (12): 2858-2865.
[3]	Sojdr L, Cermak J, Barilet R. Optimazation of Dual - maxier Time - Difference multiplier [A]. Proceedings of the 18th European Frequency and Time Forum (EFTF) [C], Guildford, UK, 2004.
[4]	5120A, 5120A-01, and 5115A Phase Noise Test Set Operations and Maintenance Manual [M], Microchip, Inc, USA, 2019.
[5]	3120A, Phase Noise Test Probe User Guide [M], Microchip, Inc, USA, 2019.
[6]	VCH-315, VCH-314 Frequency Comparator Operation Manual [M], “VREMYA-CH”, Inc, Russia, 2019.
[7]	GREENHALL C A. Common - source phase error of a dual - mixer stability analyzer [C]. TMO Progress Report, Califormia, USA : Jet Propulsion Laboratory, 2000.
[8]	GROVE J, HEIN J, MARTIN R A, et al. Comparison of heterodyne and direct-sampling techiques for phase- difference measurements [C]. NCSL International Workshop and Symposium, 2005.
[9]	JJG 292-2009 Verification Regulation of Rubidium Atomic Frequency Standard [S].
[10]	JJG 492-2009 Verification Regulation of Frequency Standard of Cesium Atom [S].
[11]	JJG 1004-2005 Verification Regulation of Hydrogen Atom Frequency Standard [S].
[12]	JJG 545-2015 Verification Regulation of Frequency Comparator [S].
[13]	JJG 181-2005 Verification Regulation of Frequency Standard of Quartz Crystal [S].
[14]	JJG 349-2014 Verification Regulation of Universal Counters [S].
[15]	JJG 841-2012 Verification Regulation of Microwave Frequency Ccunter [S].
[16]	GROVE J, HEIN J, RETTA R J, et al. Direct- digital phase -noise measurement [C]. 2004 IEEE International Ultrasonics, Ferroelectrics, and Frequency Control Joint 50th Anniversary Conference, 2004: 287-291.

Cite This Article

Plain Text BibTeX RIS

APA Style

Zhang Yue, Liu Yanqi, Lin Tao, Yuan Xiaodi, Zhang Ammin, et al. (2021). Development the Measurement System of the Multi-Channel Frequency Standard Comparison. Journal of Electrical and Electronic Engineering, 9(4), 116-122. https://doi.org/10.11648/j.jeee.20210904.13

Copy | Download

ACS Style

Zhang Yue; Liu Yanqi; Lin Tao; Yuan Xiaodi; Zhang Ammin, et al. Development the Measurement System of the Multi-Channel Frequency Standard Comparison. J. Electr. Electron. Eng. 2021, 9(4), 116-122. doi: 10.11648/j.jeee.20210904.13

Copy | Download

AMA Style

Zhang Yue, Liu Yanqi, Lin Tao, Yuan Xiaodi, Zhang Ammin, et al. Development the Measurement System of the Multi-Channel Frequency Standard Comparison. J Electr Electron Eng. 2021;9(4):116-122. doi: 10.11648/j.jeee.20210904.13

Copy | Download

@article{10.11648/j.jeee.20210904.13,
  author = {Zhang Yue and Liu Yanqi and Lin Tao and Yuan Xiaodi and Zhang Ammin and Wang Yuzhuo},
  title = {Development the Measurement System of the Multi-Channel Frequency Standard Comparison},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {9},
  number = {4},
  pages = {116-122},
  doi = {10.11648/j.jeee.20210904.13},
  url = {https://doi.org/10.11648/j.jeee.20210904.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20210904.13},
  abstract = {This paper introduces a measurement system and method of high-speed sampling and full digital for the comparison of multi-channel frequency standard. The hardware of the system consists of 4 parts: A: Impedance matching module (After matching with the impedance of the acquisition circuit, the two input signals are transformed into suitable amplitude, and then transformed into digital signals by the high-speed acquisition circuit). B: High speed data acquisition module. C: Data real-time processing module. D: Calculation module for phase difference and frequency stability. The system not only can achieve real-time processing under the minimum computing resources, but also provide the upper computer with complete information and equivalent frequency data with small amount of data. Moreover, the fast and high-precision calculation of phase difference and frequency stability can be achieved by improving the calculation process. The software of the system meets the requirements for the technical specifications of national metrology. Compared with domestic and foreign frequency standard comparators, the interface of software is more friendly, the operation is more convenient, and it has a strong ability to analyze and process data. The test results show that the uncertainty of the system is better than 1.5 ×10-13 (sampling time is 1 second), which is consistent with Russian VCH-315 index.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Development the Measurement System of the Multi-Channel Frequency Standard Comparison
AU  - Zhang Yue
AU  - Liu Yanqi
AU  - Lin Tao
AU  - Yuan Xiaodi
AU  - Zhang Ammin
AU  - Wang Yuzhuo
Y1  - 2021/08/04
PY  - 2021
N1  - https://doi.org/10.11648/j.jeee.20210904.13
DO  - 10.11648/j.jeee.20210904.13
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 116
EP  - 122
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20210904.13
AB  - This paper introduces a measurement system and method of high-speed sampling and full digital for the comparison of multi-channel frequency standard. The hardware of the system consists of 4 parts: A: Impedance matching module (After matching with the impedance of the acquisition circuit, the two input signals are transformed into suitable amplitude, and then transformed into digital signals by the high-speed acquisition circuit). B: High speed data acquisition module. C: Data real-time processing module. D: Calculation module for phase difference and frequency stability. The system not only can achieve real-time processing under the minimum computing resources, but also provide the upper computer with complete information and equivalent frequency data with small amount of data. Moreover, the fast and high-precision calculation of phase difference and frequency stability can be achieved by improving the calculation process. The software of the system meets the requirements for the technical specifications of national metrology. Compared with domestic and foreign frequency standard comparators, the interface of software is more friendly, the operation is more convenient, and it has a strong ability to analyze and process data. The test results show that the uncertainty of the system is better than 1.5 ×10-13 (sampling time is 1 second), which is consistent with Russian VCH-315 index.
VL  - 9
IS  - 4
ER  -

Copy | Download

Author Information

Zhang Yue

National Institute of Metrology, Beijing, China
Liu Yanqi

Xinghan Technology Inc, Beijing, China
Lin Tao

National Institute of Metrology, Beijing, China
Yuan Xiaodi

National Institute of Metrology, Beijing, China
Zhang Ammin

National Institute of Metrology, Beijing, China
Wang Yuzhuo

National Institute of Metrology, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zhang Yue, Liu Yanqi, Lin Tao, Yuan Xiaodi, Zhang Ammin, et al. (2021). Development the Measurement System of the Multi-Channel Frequency Standard Comparison. Journal of Electrical and Electronic Engineering, 9(4), 116-122. https://doi.org/10.11648/j.jeee.20210904.13

Copy | Download

ACS Style

Zhang Yue; Liu Yanqi; Lin Tao; Yuan Xiaodi; Zhang Ammin, et al. Development the Measurement System of the Multi-Channel Frequency Standard Comparison. J. Electr. Electron. Eng. 2021, 9(4), 116-122. doi: 10.11648/j.jeee.20210904.13

Copy | Download

AMA Style

Zhang Yue, Liu Yanqi, Lin Tao, Yuan Xiaodi, Zhang Ammin, et al. Development the Measurement System of the Multi-Channel Frequency Standard Comparison. J Electr Electron Eng. 2021;9(4):116-122. doi: 10.11648/j.jeee.20210904.13

Copy | Download

@article{10.11648/j.jeee.20210904.13,
  author = {Zhang Yue and Liu Yanqi and Lin Tao and Yuan Xiaodi and Zhang Ammin and Wang Yuzhuo},
  title = {Development the Measurement System of the Multi-Channel Frequency Standard Comparison},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {9},
  number = {4},
  pages = {116-122},
  doi = {10.11648/j.jeee.20210904.13},
  url = {https://doi.org/10.11648/j.jeee.20210904.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20210904.13},
  abstract = {This paper introduces a measurement system and method of high-speed sampling and full digital for the comparison of multi-channel frequency standard. The hardware of the system consists of 4 parts: A: Impedance matching module (After matching with the impedance of the acquisition circuit, the two input signals are transformed into suitable amplitude, and then transformed into digital signals by the high-speed acquisition circuit). B: High speed data acquisition module. C: Data real-time processing module. D: Calculation module for phase difference and frequency stability. The system not only can achieve real-time processing under the minimum computing resources, but also provide the upper computer with complete information and equivalent frequency data with small amount of data. Moreover, the fast and high-precision calculation of phase difference and frequency stability can be achieved by improving the calculation process. The software of the system meets the requirements for the technical specifications of national metrology. Compared with domestic and foreign frequency standard comparators, the interface of software is more friendly, the operation is more convenient, and it has a strong ability to analyze and process data. The test results show that the uncertainty of the system is better than 1.5 ×10-13 (sampling time is 1 second), which is consistent with Russian VCH-315 index.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Development the Measurement System of the Multi-Channel Frequency Standard Comparison
AU  - Zhang Yue
AU  - Liu Yanqi
AU  - Lin Tao
AU  - Yuan Xiaodi
AU  - Zhang Ammin
AU  - Wang Yuzhuo
Y1  - 2021/08/04
PY  - 2021
N1  - https://doi.org/10.11648/j.jeee.20210904.13
DO  - 10.11648/j.jeee.20210904.13
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 116
EP  - 122
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20210904.13
AB  - This paper introduces a measurement system and method of high-speed sampling and full digital for the comparison of multi-channel frequency standard. The hardware of the system consists of 4 parts: A: Impedance matching module (After matching with the impedance of the acquisition circuit, the two input signals are transformed into suitable amplitude, and then transformed into digital signals by the high-speed acquisition circuit). B: High speed data acquisition module. C: Data real-time processing module. D: Calculation module for phase difference and frequency stability. The system not only can achieve real-time processing under the minimum computing resources, but also provide the upper computer with complete information and equivalent frequency data with small amount of data. Moreover, the fast and high-precision calculation of phase difference and frequency stability can be achieved by improving the calculation process. The software of the system meets the requirements for the technical specifications of national metrology. Compared with domestic and foreign frequency standard comparators, the interface of software is more friendly, the operation is more convenient, and it has a strong ability to analyze and process data. The test results show that the uncertainty of the system is better than 1.5 ×10-13 (sampling time is 1 second), which is consistent with Russian VCH-315 index.
VL  - 9
IS  - 4
ER  -

Copy | Download