Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique

Aicha Mchbal; Naima Amar Touhami; Abdelhafid Marroun

doi:doi:10.11648/j.jeee.20231103.11

| Peer-Reviewed

Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique

Aicha Mchbal, Naima Amar Touhami, Abdelhafid Marroun

Published in Journal of Electrical and Electronic Engineering (Volume 11, Issue 3)

Received: 5 May 2023 Accepted: 31 May 2023 Published: 20 June 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This research presents a study of a four-element MIMO antenna, whose objective is to design a miniaturized or a reduced inter-elements spacing of a quad–element MIMO antenna that operates in UWB spectrum ranging between 3.1-10.6 GHz, and that characterizes by a reduced inter-element electromagnetic coupling which is due to nearfield coupling and surface current propagation between ports. The proposed MIMO antenna radiating elements are developed from a simple rectangular patch antenna. With the aim to reduce the electromagnetic coupling between radiators and cover the whole UWB bandwidth, diverse techniques are employed, including the employment of the polarization diversity technique, whereas the use of decoupling structures is prevented so as to avoid a bulky antenna assembly. Measurements show that the studied UWB MIMO antenna is characterized by a good compactness whose dimension is about 31×31×0.8 mm³, and it offers a -10 dB impedance bandwidth of 3-12.8 GHz, a mutual coupling <-15 dB, correlation coefficients<0.3, a diversity gain of about 8.75 and a total active reflection coefficient less than -12 dB. Results prove that despite of the miniaturized size of the studied antenna assembly and the disuse of decoupling mechanisms, the presented antenna provides potential diversity performances for use in UWB applications.

Published in	Journal of Electrical and Electronic Engineering (Volume 11, Issue 3)
DOI	10.11648/j.jeee.20231103.11
Page(s)	67-76
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

MIMO Assembly, Electromagnetic Coupling, Decoupling Mechanisms, Diversity Techniques, UWB Applications

References

[1]	Haque, Sk & Alam, Hashibul. (2019). Further slot antenna miniaturization and bandwidth enhancement. International Journal of RF and Microwave Computer-Aided Engineering. 1-8. 10.1002/mmce.21732.
[2]	Bhattacharjee, Anindita & Karmakar, Anirban & Saha, Anuradha & Bhattacharya, Diptendu. (2021). Design of a compact UWB MIMO‐diversity antenna incorporating fractal inspired isolation structure with band notch characteristics. Microwave and Optical Technology Letters. 63. 10.1002/mop.32927.
[3]	Bellary, Anudeep & Kandasamy, Krishnamoorthy. K & Rao, Patnam. (2020). Mitigation of mutual coupling in 2 X 2 dual slant polarized MIMO antennas using periodic array of SRRs loaded with transmission line for LTE band 40. International Journal of RF and Microwave Computer-Aided Engineering. 30. 10.1002/mmce.22454.
[4]	I. Nadeem and D. Choi, "Study on Mutual Coupling Reduction Technique for MIMO Antennas," in IEEE Access, vol. 7, pp. 563-586, 2019, doi: 10.1109/ACCESS.2018.2885558.
[5]	S. Bukkawar and V. Ahmed, "Study of Various Mutual Coupling Reduction Techniques in MIMO Antennas," 2019 Third International Conference on Inventive Systems and Control (ICISC), 2019, pp. 106-113, doi: 10.1109/ICISC44355.2019.9036446.
[6]	U. Sharma and G. Srivastava, "A Study of Various Techniques to Reduce Mutual Coupling in MIMO Antennas," 2020 Second International Conference on Inventive Research in Computing Applications (ICIRCA), 2020, pp. 1-7, doi: 10.1109/ICIRCA48905.2020.9182992.
[7]	H. Werfelli, K. Tayari, M. Chaoui, M. Lahiani and H. Ghariani, "Design of rectangular microstrip patch antenna," 2016 2nd International Conference on Advanced Technologies for Signal and Image Processing (ATSIP), 2016, pp. 798-803, doi: 10.1109/ATSIP.2016.7523197.
[8]	Jadaun, Veerendra & Sharma, Pavan. (2018). Design a Microstrip Patch Antenna of Singal Band for 1.8GHz.
[9]	Waqas, Muhammad & Bashir, Shahid & Khan, Muhammad. (2015). High Gain Microstrip Patch Antenna using Double Negative Metamaterial. 10.1109/ICET.2015.7389171.
[10]	Mchbal A, Touhami NA, Elftouh H, Moubadir M, Dkiouak A. Spatial and Polarization Diversity Performance Analysis of a Compact MIMO Antenna. Procedia Manuf 2019; 32: 647–52.
[11]	Xu, Qian & Xing, Lei & Zhao, Yongjiu & Jia, Tianyuan & Huang, Yi. (2021). Probability distributions of three‐antenna efficiency measurement in a reverberation chamber. IET Microwaves, Antennas & Propagation. 15. 10.1049/mia2.12155.
[12]	Sanapala, Ravikumar. (2008). Characterization of FR-4 Printed Circuit Board Laminates Before and After Exposure to Lead-free Soldering Conditions.
[13]	M. Magerl, T. Mandic and A. Baric, "Broadband characterization of SMA connectors by measurements," 2014 37th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2014, pp. 104-109, doi: 10.1109/MIPRO.2014.6859542.
[14]	Rohde & schwarz, “R & S ® Znb Vector Network Analyzer,” Benjamin Franklin Drive, Columbia, USA, 2022.
[15]	Imaculate Rosaline, Arvind Kumar, Prashant Upadhyay, Abu Hena Murshed, "Four Element MIMO Antenna Systems with Decoupling Lines for High-Speed 5G Wireless Data Communication", International Journal of Antennas and Propagation, vol. 2022, Article ID 9078929, 13 pages, 2022. https://doi.org/10.1155/2022/9078929.
[16]	Ying Z., Chiu CY., Zhao K., Zhang S., He S. (2016) Antenna Design for Diversity and MIMO Application. In: Chen Z., Liu D., Nakano H., Qing X., Zwick T. (eds) Handbook of Antenna Technologies. Springer, Singapore. https://doi.org/10.1007/978-981-4560-44-3_53.
[17]	Papamichael, Vasilis & Karadimas, Petros. (2015). New Intuitive Metrics for Diversity Performance Evaluation of Multi-element Antenna Systems.
[18]	Plicanic, Vanja & Lau, Buon & Derneryd, A. & Ying, Zhinong. (2009). Actual Diversity Performance of a Multiband Diversity Antenna With Hand and Head Effects. Antennas and Propagation, IEEE Transactions on. 57. 1547 - 1556. 10.1109/TAP.2009.2016707.
[19]	Chae, Sung & Oh, Se-keun & Park, Seong-Ook. (2007). Analysis of mutual coupling, correlations, and TARC in WiBro MIMO array antenna. Antennas and Wireless Propagation Letters, IEEE. 6. 122 - 125. 10.1109/LAWP.2007.893109.
[20]	Elix Urimubenshi, Dominic B. O. Konditi, Jean de Dieu Iyakaremye, Pierre Moukala Mpele, Augustin Munyaneza, “A novel approach for low mutual coupling and ultra-compact Two Port MIMO antenna development for UWB wireless application”, Heliyon, Volume 8, Issue 3, 2022.
[21]	GEOZONDAS, “UWB antennas, sampling oscilloscopes, programmable delay lines, pulse splitters for UWB radar applications and measurement systems,” 2010.
[22]	M. S. Aw, K. Ashwath, P. Ramaswamy, T. Ali, and J. Anguera, “A Uniquely Shaped MIMO Antenna on FR4 Material to Enhance Isolation and Bandwidth for Wireless Applications,” AEUE - Int. J. Electron. Commun., p. 153316, 2020.
[23]	Nguyen Khac Kiem, Huynh Nguyen Bao Phuong, Dao Ngoc Chien, "Design of Compact 4 × 4 UWB-MIMO Antenna with WLAN Band Rejection", International Journal of Antennas and Propagation, vol. 2014, Article ID 539094, 11 pages, 2014. https://doi.org/10.1155/2014/539094
[24]	Hassan, A. T., Sharawi, M. S. Four element half circle shape printed MIMO antenna. Microw Opt Technol Lett 2016; 58: 2990-92. doi: 10.1002/mop.30201.
[25]	Karimian R, Soleimani M, Hashemi SM. Tri-band four elements MIMO antenna system for WLAN and WiMAX application. J Electromagn Waves Appl 2012; 26: 2348–57. doi: 10.1080/09205071.2012.734433.

Cite This Article

Plain Text BibTeX RIS

APA Style

Aicha Mchbal, Naima Amar Touhami, Abdelhafid Marroun. (2023). Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique. Journal of Electrical and Electronic Engineering, 11(3), 67-76. https://doi.org/10.11648/j.jeee.20231103.11

Copy | Download

ACS Style

Aicha Mchbal; Naima Amar Touhami; Abdelhafid Marroun. Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique. J. Electr. Electron. Eng. 2023, 11(3), 67-76. doi: 10.11648/j.jeee.20231103.11

Copy | Download

AMA Style

Aicha Mchbal, Naima Amar Touhami, Abdelhafid Marroun. Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique. J Electr Electron Eng. 2023;11(3):67-76. doi: 10.11648/j.jeee.20231103.11

Copy | Download

@article{10.11648/j.jeee.20231103.11,
  author = {Aicha Mchbal and Naima Amar Touhami and Abdelhafid Marroun},
  title = {Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {11},
  number = {3},
  pages = {67-76},
  doi = {10.11648/j.jeee.20231103.11},
  url = {https://doi.org/10.11648/j.jeee.20231103.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20231103.11},
  abstract = {This research presents a study of a four-element MIMO antenna, whose objective is to design a miniaturized or a reduced inter-elements spacing of a quad–element MIMO antenna that operates in UWB spectrum ranging between 3.1-10.6 GHz, and that characterizes by a reduced inter-element electromagnetic coupling which is due to nearfield coupling and surface current propagation between ports. The proposed MIMO antenna radiating elements are developed from a simple rectangular patch antenna. With the aim to reduce the electromagnetic coupling between radiators and cover the whole UWB bandwidth, diverse techniques are employed, including the employment of the polarization diversity technique, whereas the use of decoupling structures is prevented so as to avoid a bulky antenna assembly. Measurements show that the studied UWB MIMO antenna is characterized by a good compactness whose dimension is about 31×31×0.8 mm3, and it offers a -10 dB impedance bandwidth of 3-12.8 GHz, a mutual coupling <-15 dB, correlation coefficients<0.3, a diversity gain of about 8.75 and a total active reflection coefficient less than -12 dB. Results prove that despite of the miniaturized size of the studied antenna assembly and the disuse of decoupling mechanisms, the presented antenna provides potential diversity performances for use in UWB applications.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique
AU  - Aicha Mchbal
AU  - Naima Amar Touhami
AU  - Abdelhafid Marroun
Y1  - 2023/06/20
PY  - 2023
N1  - https://doi.org/10.11648/j.jeee.20231103.11
DO  - 10.11648/j.jeee.20231103.11
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 67
EP  - 76
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20231103.11
AB  - This research presents a study of a four-element MIMO antenna, whose objective is to design a miniaturized or a reduced inter-elements spacing of a quad–element MIMO antenna that operates in UWB spectrum ranging between 3.1-10.6 GHz, and that characterizes by a reduced inter-element electromagnetic coupling which is due to nearfield coupling and surface current propagation between ports. The proposed MIMO antenna radiating elements are developed from a simple rectangular patch antenna. With the aim to reduce the electromagnetic coupling between radiators and cover the whole UWB bandwidth, diverse techniques are employed, including the employment of the polarization diversity technique, whereas the use of decoupling structures is prevented so as to avoid a bulky antenna assembly. Measurements show that the studied UWB MIMO antenna is characterized by a good compactness whose dimension is about 31×31×0.8 mm3, and it offers a -10 dB impedance bandwidth of 3-12.8 GHz, a mutual coupling <-15 dB, correlation coefficients<0.3, a diversity gain of about 8.75 and a total active reflection coefficient less than -12 dB. Results prove that despite of the miniaturized size of the studied antenna assembly and the disuse of decoupling mechanisms, the presented antenna provides potential diversity performances for use in UWB applications.
VL  - 11
IS  - 3
ER  -

Copy | Download

Author Information

Aicha Mchbal

Physics Department, Abdelmalek Essaadi University, Tetuan, Morocco
Naima Amar Touhami

Physics Department, Abdelmalek Essaadi University, Tetuan, Morocco
Abdelhafid Marroun

Physics Department, Abdelmalek Essaadi University, Tetuan, Morocco

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Aicha Mchbal, Naima Amar Touhami, Abdelhafid Marroun. (2023). Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique. Journal of Electrical and Electronic Engineering, 11(3), 67-76. https://doi.org/10.11648/j.jeee.20231103.11

Copy | Download

ACS Style

Aicha Mchbal; Naima Amar Touhami; Abdelhafid Marroun. Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique. J. Electr. Electron. Eng. 2023, 11(3), 67-76. doi: 10.11648/j.jeee.20231103.11

Copy | Download

AMA Style

Aicha Mchbal, Naima Amar Touhami, Abdelhafid Marroun. Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique. J Electr Electron Eng. 2023;11(3):67-76. doi: 10.11648/j.jeee.20231103.11

Copy | Download

@article{10.11648/j.jeee.20231103.11,
  author = {Aicha Mchbal and Naima Amar Touhami and Abdelhafid Marroun},
  title = {Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {11},
  number = {3},
  pages = {67-76},
  doi = {10.11648/j.jeee.20231103.11},
  url = {https://doi.org/10.11648/j.jeee.20231103.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20231103.11},
  abstract = {This research presents a study of a four-element MIMO antenna, whose objective is to design a miniaturized or a reduced inter-elements spacing of a quad–element MIMO antenna that operates in UWB spectrum ranging between 3.1-10.6 GHz, and that characterizes by a reduced inter-element electromagnetic coupling which is due to nearfield coupling and surface current propagation between ports. The proposed MIMO antenna radiating elements are developed from a simple rectangular patch antenna. With the aim to reduce the electromagnetic coupling between radiators and cover the whole UWB bandwidth, diverse techniques are employed, including the employment of the polarization diversity technique, whereas the use of decoupling structures is prevented so as to avoid a bulky antenna assembly. Measurements show that the studied UWB MIMO antenna is characterized by a good compactness whose dimension is about 31×31×0.8 mm3, and it offers a -10 dB impedance bandwidth of 3-12.8 GHz, a mutual coupling <-15 dB, correlation coefficients<0.3, a diversity gain of about 8.75 and a total active reflection coefficient less than -12 dB. Results prove that despite of the miniaturized size of the studied antenna assembly and the disuse of decoupling mechanisms, the presented antenna provides potential diversity performances for use in UWB applications.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Low Electromagnetic Coupling Achievement of a Quad-Element UWB MIMO Antenna Using Miniaturization Technique
AU  - Aicha Mchbal
AU  - Naima Amar Touhami
AU  - Abdelhafid Marroun
Y1  - 2023/06/20
PY  - 2023
N1  - https://doi.org/10.11648/j.jeee.20231103.11
DO  - 10.11648/j.jeee.20231103.11
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 67
EP  - 76
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20231103.11
AB  - This research presents a study of a four-element MIMO antenna, whose objective is to design a miniaturized or a reduced inter-elements spacing of a quad–element MIMO antenna that operates in UWB spectrum ranging between 3.1-10.6 GHz, and that characterizes by a reduced inter-element electromagnetic coupling which is due to nearfield coupling and surface current propagation between ports. The proposed MIMO antenna radiating elements are developed from a simple rectangular patch antenna. With the aim to reduce the electromagnetic coupling between radiators and cover the whole UWB bandwidth, diverse techniques are employed, including the employment of the polarization diversity technique, whereas the use of decoupling structures is prevented so as to avoid a bulky antenna assembly. Measurements show that the studied UWB MIMO antenna is characterized by a good compactness whose dimension is about 31×31×0.8 mm3, and it offers a -10 dB impedance bandwidth of 3-12.8 GHz, a mutual coupling <-15 dB, correlation coefficients<0.3, a diversity gain of about 8.75 and a total active reflection coefficient less than -12 dB. Results prove that despite of the miniaturized size of the studied antenna assembly and the disuse of decoupling mechanisms, the presented antenna provides potential diversity performances for use in UWB applications.
VL  - 11
IS  - 3
ER  -

Copy | Download