Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment

Xiaosen Wang; Gang Li; Jie Li

doi:doi:10.11648/j.wjap.20220703.12

| Peer-Reviewed

Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment

Xiaosen Wang, Gang Li, Jie Li

Published in World Journal of Applied Physics (Volume 7, Issue 3)

Received: 10 October 2022 Accepted: 7 November 2022 Published: 22 November 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Warm mix asphalt has special viscosity characteristics, and the compaction mechanism is different from that of hot mix asphalt. It is necessary to investigate the compaction characteristics of warm mix asphalt by laboratory test. The compaction characteristics of surface active warm mix SMA mixture were determined by viscosive-temperature curve, rotational compaction and Marshall compaction. The experimental results show that the surface active warm mix has little effect on the viscosity of asphalt, it changes the interface characteristics between asphalt and aggregate, and makes the mixture more easily compacted. The viscosity-temperature curve is not suitable for determining the mixing and rolling temperature of surface active warm mix asphalt mixture; In the process of Marshall compaction, the relative movement between aggregates was limited, and the test itself could not fully reflect the cooling effect of surface active warm mix. The forming temperature can not be determined according to the cooling experience of warm mixing agent in engineering application. It should be shaped according to the temperature of the hot mix; Using rotary compaction molding SMA mixture, under the condition of 140°C~155°C, 120 times of rotary compaction can ensure that the mixture can achieve a better compacting state, surface active warm mixing agent can reduce the molding temperature by 10~20°C.

Published in	World Journal of Applied Physics (Volume 7, Issue 3)
DOI	10.11648/j.wjap.20220703.12
Page(s)	43-47
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Surface Activity, Warm Mix, Compaction Characteristics, Viscosity Curve, Compaction Temperature

References

[1]	Li X, Song X Y, Zhang W Z 2013 Study on compaction characteristics of warm mix asphalt mixture based on surface active technology Journal of Highway (4): 103~106.
[2]	Cheng L, Zhou W, Zhang Sh Ch 2009 Study on compaction performance of warm mix asphalt mixture Journal of Modern transportation technology 6 (6): 4~6.
[3]	Wang S Y, Yu J, Zhang G T, Li L P 2013 Experimental study on compaction characteristics of warm mix asphalt mixture Journal of Highway (5): 143~147.
[4]	Guo P, Tang B M, Cheng Z Q, Li J K 2012. Compaction characteristics of warm mix reclaimed asphalt mixture Journal of Wuhan University of Technology 34 (7) 42~45.
[5]	Zuo Q Y 2014 Determination of compaction temperature and performance evaluation of warm mix SBS asphalt mixture Journal of Modern transportation technology 11 (1): 1~3.
[6]	Jiang Y, Ma H B, Meng H L, Zhou X Y 2020 Research on rotary compaction characteristics of GB4 asphalt mixture based on PCG Journal of China and Foreign Highway 40 (5): 301~305.
[7]	Yang B 2017 High temperature performance of AC-13 based on GTM rotary compaction parameters Study on Evaluation Index Journal of Hunan Communication Science and Technology 42 (2): 68~71.
[8]	Feng X J, Kang Q 2020 Laboratory compaction method on hot mix asphalt mixture Effect of void fraction and mechanical properties Journal of China and Foreign Highway 40 (3): 291~297.
[9]	Sukhija M, Wagh V P, Saboo N 2021 Development of workability based approach for assessment of production temperatures of warm mix asphalt mixtures Construction and Building Materials 305: 10.1016.
[10]	Wang C, Hao P W, Ran F 2020 Method for determining the mixing and compaction temperature of warm mix asphalt mixture Journal of Wuhan University of Technology (Transportation Science & Engineering) 44 (4): 640~643.
[11]	Nan Q C 2019 Influencing Factors of Compaction Characteristics of Warm Mix Asphalt Mixture Journal of Chongqing Jiantong University (Natural Science) 38 (12): 63~68.
[12]	Cai L Z, Li G, Li X, He Z Y, Xu X X, Chen M H 2022 Study on Stability State of Asphalt Mixture Skeleton: Compaction Power and Contact Point Analysis Journal of Basic Science and Engineering 30 (02): 341~350.
[13]	Xiong S H, Zheng Y B, Wang H T, Jiang Y J, Yi Y 2022 Performance evaluation of asphalt mixture with different forming methods for long life pavement Journal of Highway 67 (10): 112~118.
[14]	Lai Y Q, Wang J, Chen H R, Huang Y H 2020 Study on temperature sensitivity of asphalt mixture Journal of Western Transportation Science and Technology 2020 (12): 23~26.
[15]	Li Y Y 2021 Experimental analysis of splitting tensile strength of asphalt mixture based on rotary compaction method Journal of Fujian Transportation Science and Technology 2021 (05): 39~42.

Cite This Article

Plain Text BibTeX RIS

APA Style

Xiaosen Wang, Gang Li, Jie Li. (2022). Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment. World Journal of Applied Physics, 7(3), 43-47. https://doi.org/10.11648/j.wjap.20220703.12

Copy | Download

ACS Style

Xiaosen Wang; Gang Li; Jie Li. Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment. World J. Appl. Phys. 2022, 7(3), 43-47. doi: 10.11648/j.wjap.20220703.12

Copy | Download

AMA Style

Xiaosen Wang, Gang Li, Jie Li. Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment. World J Appl Phys. 2022;7(3):43-47. doi: 10.11648/j.wjap.20220703.12

Copy | Download

@article{10.11648/j.wjap.20220703.12,
  author = {Xiaosen Wang and Gang Li and Jie Li},
  title = {Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment},
  journal = {World Journal of Applied Physics},
  volume = {7},
  number = {3},
  pages = {43-47},
  doi = {10.11648/j.wjap.20220703.12},
  url = {https://doi.org/10.11648/j.wjap.20220703.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wjap.20220703.12},
  abstract = {Warm mix asphalt has special viscosity characteristics, and the compaction mechanism is different from that of hot mix asphalt. It is necessary to investigate the compaction characteristics of warm mix asphalt by laboratory test. The compaction characteristics of surface active warm mix SMA mixture were determined by viscosive-temperature curve, rotational compaction and Marshall compaction. The experimental results show that the surface active warm mix has little effect on the viscosity of asphalt, it changes the interface characteristics between asphalt and aggregate, and makes the mixture more easily compacted. The viscosity-temperature curve is not suitable for determining the mixing and rolling temperature of surface active warm mix asphalt mixture; In the process of Marshall compaction, the relative movement between aggregates was limited, and the test itself could not fully reflect the cooling effect of surface active warm mix. The forming temperature can not be determined according to the cooling experience of warm mixing agent in engineering application. It should be shaped according to the temperature of the hot mix; Using rotary compaction molding SMA mixture, under the condition of 140°C~155°C, 120 times of rotary compaction can ensure that the mixture can achieve a better compacting state, surface active warm mixing agent can reduce the molding temperature by 10~20°C.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment
AU  - Xiaosen Wang
AU  - Gang Li
AU  - Jie Li
Y1  - 2022/11/22
PY  - 2022
N1  - https://doi.org/10.11648/j.wjap.20220703.12
DO  - 10.11648/j.wjap.20220703.12
T2  - World Journal of Applied Physics
JF  - World Journal of Applied Physics
JO  - World Journal of Applied Physics
SP  - 43
EP  - 47
PB  - Science Publishing Group
SN  - 2637-6008
UR  - https://doi.org/10.11648/j.wjap.20220703.12
AB  - Warm mix asphalt has special viscosity characteristics, and the compaction mechanism is different from that of hot mix asphalt. It is necessary to investigate the compaction characteristics of warm mix asphalt by laboratory test. The compaction characteristics of surface active warm mix SMA mixture were determined by viscosive-temperature curve, rotational compaction and Marshall compaction. The experimental results show that the surface active warm mix has little effect on the viscosity of asphalt, it changes the interface characteristics between asphalt and aggregate, and makes the mixture more easily compacted. The viscosity-temperature curve is not suitable for determining the mixing and rolling temperature of surface active warm mix asphalt mixture; In the process of Marshall compaction, the relative movement between aggregates was limited, and the test itself could not fully reflect the cooling effect of surface active warm mix. The forming temperature can not be determined according to the cooling experience of warm mixing agent in engineering application. It should be shaped according to the temperature of the hot mix; Using rotary compaction molding SMA mixture, under the condition of 140°C~155°C, 120 times of rotary compaction can ensure that the mixture can achieve a better compacting state, surface active warm mixing agent can reduce the molding temperature by 10~20°C.
VL  - 7
IS  - 3
ER  -

Copy | Download

Author Information

Xiaosen Wang

Research and Development Center of Transport Industry of Technologies, Materials and Equipments of Highway Construction and Maintenance, Shijiazhuang, China
Gang Li

China Construction Port Group CO. LTD, Qingdao, China
Jie Li

China Construction Port Group CO. LTD, Qingdao, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Xiaosen Wang, Gang Li, Jie Li. (2022). Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment. World Journal of Applied Physics, 7(3), 43-47. https://doi.org/10.11648/j.wjap.20220703.12

Copy | Download

ACS Style

Xiaosen Wang; Gang Li; Jie Li. Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment. World J. Appl. Phys. 2022, 7(3), 43-47. doi: 10.11648/j.wjap.20220703.12

Copy | Download

AMA Style

Xiaosen Wang, Gang Li, Jie Li. Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment. World J Appl Phys. 2022;7(3):43-47. doi: 10.11648/j.wjap.20220703.12

Copy | Download

@article{10.11648/j.wjap.20220703.12,
  author = {Xiaosen Wang and Gang Li and Jie Li},
  title = {Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment},
  journal = {World Journal of Applied Physics},
  volume = {7},
  number = {3},
  pages = {43-47},
  doi = {10.11648/j.wjap.20220703.12},
  url = {https://doi.org/10.11648/j.wjap.20220703.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wjap.20220703.12},
  abstract = {Warm mix asphalt has special viscosity characteristics, and the compaction mechanism is different from that of hot mix asphalt. It is necessary to investigate the compaction characteristics of warm mix asphalt by laboratory test. The compaction characteristics of surface active warm mix SMA mixture were determined by viscosive-temperature curve, rotational compaction and Marshall compaction. The experimental results show that the surface active warm mix has little effect on the viscosity of asphalt, it changes the interface characteristics between asphalt and aggregate, and makes the mixture more easily compacted. The viscosity-temperature curve is not suitable for determining the mixing and rolling temperature of surface active warm mix asphalt mixture; In the process of Marshall compaction, the relative movement between aggregates was limited, and the test itself could not fully reflect the cooling effect of surface active warm mix. The forming temperature can not be determined according to the cooling experience of warm mixing agent in engineering application. It should be shaped according to the temperature of the hot mix; Using rotary compaction molding SMA mixture, under the condition of 140°C~155°C, 120 times of rotary compaction can ensure that the mixture can achieve a better compacting state, surface active warm mixing agent can reduce the molding temperature by 10~20°C.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Study on the Compaction Temperature of Warm Mix Asphalt Mixture Based on Different Test Equipment
AU  - Xiaosen Wang
AU  - Gang Li
AU  - Jie Li
Y1  - 2022/11/22
PY  - 2022
N1  - https://doi.org/10.11648/j.wjap.20220703.12
DO  - 10.11648/j.wjap.20220703.12
T2  - World Journal of Applied Physics
JF  - World Journal of Applied Physics
JO  - World Journal of Applied Physics
SP  - 43
EP  - 47
PB  - Science Publishing Group
SN  - 2637-6008
UR  - https://doi.org/10.11648/j.wjap.20220703.12
AB  - Warm mix asphalt has special viscosity characteristics, and the compaction mechanism is different from that of hot mix asphalt. It is necessary to investigate the compaction characteristics of warm mix asphalt by laboratory test. The compaction characteristics of surface active warm mix SMA mixture were determined by viscosive-temperature curve, rotational compaction and Marshall compaction. The experimental results show that the surface active warm mix has little effect on the viscosity of asphalt, it changes the interface characteristics between asphalt and aggregate, and makes the mixture more easily compacted. The viscosity-temperature curve is not suitable for determining the mixing and rolling temperature of surface active warm mix asphalt mixture; In the process of Marshall compaction, the relative movement between aggregates was limited, and the test itself could not fully reflect the cooling effect of surface active warm mix. The forming temperature can not be determined according to the cooling experience of warm mixing agent in engineering application. It should be shaped according to the temperature of the hot mix; Using rotary compaction molding SMA mixture, under the condition of 140°C~155°C, 120 times of rotary compaction can ensure that the mixture can achieve a better compacting state, surface active warm mixing agent can reduce the molding temperature by 10~20°C.
VL  - 7
IS  - 3
ER  -

Copy | Download