 
								Fast Degradation of Azo Dyes by Using Cu-based Metallic Glasses
								
									
										
											
											
												Xiao Chen Xu,
											
										
											
											
												Ke Qiang Qiu
											
										
									
								 
								
									
										Issue:
										Volume 10, Issue 1, March 2021
									
									
										Pages:
										1-4
									
								 
								
									Received:
										11 January 2021
									
									Accepted:
										20 January 2021
									
									Published:
										28 January 2021
									
								 
								
								
								
									
									
										Abstract: Wastewater containing azo dye has become a main harm in water pollution. Therefore, development of environment friendly materials with efficient purifying capacity seized more and more attention of people devoting to dye wastewater processing. On the other hand, advancement of metallic glasses in degrading organic water contaminant has also received wide concern. Cu-based amorphous alloy has excellent corrosion resistance and good stability in the process of degradation of azo dyes In the present thesis, single roller melt-spinning method Cu-Zr-Al-Y metallic glasses is applied so as to investigate degradation of azo dye Direct Blue in acid and alkaline solution. It is concluded that when the value of it is 2, 25μm ~ 30μm thick stripes of non-crystalline structures will be formed. With variation of the pH, rate of degradation will also change. The degradation rate in acidic solution is higher than that in alkaline and neutral solution. This is due to the fact that Azo bond and Cu-based amorphous alloy in dye molecule requires quite low activation energy to react, which makes degradation easier to proceed and thus macroscopic decoloration is also quickened. After the treatment of wastewater, white corrosion products will be produced on the surface of amorphous strip. It will affect the degradation effect.
										Abstract: Wastewater containing azo dye has become a main harm in water pollution. Therefore, development of environment friendly materials with efficient purifying capacity seized more and more attention of people devoting to dye wastewater processing. On the other hand, advancement of metallic glasses in degrading organic water contaminant has also receive...
										Show More
									
								
								
							
							
								 
								Characterization of Supermagnetic Cobalt Ferrite Submicrometer Particles Fabricated Under γ–Irradiation
								
									
										
											
											
												Gracien Bakambo Ekoko,
											
										
											
											
												Pierre Osomba Lohohola,
											
										
											
											
												Jérémie Lunguya Muswema,
											
										
											
											
												Hercule Mulenda Kalele,
											
										
											
											
												Omer Muamba Mvele,
											
										
											
											
												Joseph Kanza-Kanza Lobo,
											
										
											
											
												Désiré Kabuya Tshibangu
											
										
									
								 
								
									
										Issue:
										Volume 10, Issue 1, March 2021
									
									
										Pages:
										5-11
									
								 
								
									Received:
										5 April 2021
									
									Accepted:
										14 May 2021
									
									Published:
										7 June 2021
									
								 
								
								
								
									
									
										Abstract: Magnetic cobalt ferrite has wide spread applications, especially as catalyst for the conversion of alkenes to related aldehydes. Despite several studies found in the literature concerning the fabrication of cobalt ferrite, none has reported on gamma irradiation as a tool for the synthesis of submicrometer sized inverse spinel CoFe2O4. The actual investigation reports on the application of γ-irradiation method for the synthesis of superparamagnetic CoFe2O4, using metal salts precursors and organic reagents. The material fabrication occurs in two main steps as sofar described. The obtained powder was isolated after irradiation and was characterized using X-ray diffraction method, transmission electron microscopy, FT-IR spectroscopy, Raman spectroscopy, UV-visible measurements and vibrating sample magnetometer. Furthermore, the X-ray diffraction data revealed the presence of a reverse spinel structure. The magnetic properties of the fabricated powder exhibited the measured lower coercivity and remanence, demonstrating that the spinel powders are made of superparamagnetic particles and finally, to gain information about the photocatalytic properties of the synthetized material, the room temperature recorded optical measurements for different samples proved that these powder materials may probably exhibit new opportunities which could improve their high photocatalytic efficiency under visible light. The prepared materials could be used as potetentiel candididates for the oxidation of organics compounds.
										Abstract: Magnetic cobalt ferrite has wide spread applications, especially as catalyst for the conversion of alkenes to related aldehydes. Despite several studies found in the literature concerning the fabrication of cobalt ferrite, none has reported on gamma irradiation as a tool for the synthesis of submicrometer sized inverse spinel CoFe2O4. The actual in...
										Show More